Talk about the attention of handheld ultrasonic spot welding machine

 Handheld ultrasonic spot welding machine: belongs to a small ultrasonic plastic spot welding equipment, also known as ultrasonic plastic spot welding machine, ultrasonic spot welding machine, etc., this machine is suitable for all kinds of products: spot welding, riveting, riveting, welding and other processes.

Note of handheld ultrasonic spot welding machine:

1, ultrasonic handle in the normal operation of the life of more than one year.

2, in the use of poor contact conditions, immediately stop to prevent damage to piezoelectric ceramics.

3, the ultrasonic spot welding machine for intermittent work, taboo long press the switch or short switch to cause the ultrasonic transducer not intermittent work, the formation of the transducer temperature rise, the use of temperature beyond 60 degrees (transducer temperature) immediately suspended use, such as cooling down and then use, if necessary, air cooling forced cooling.

4. Check whether the ultrasonic welding head can be loosened and cracked before use, otherwise the ultrasonic power supply and ultrasonic transducer will be damaged.

5, to prevent the ultrasonic handle ceramic wire from being damp, in the ultrasonic transducer compressed air forced cooling condition, stop the use of unfiltered gas

6, be sure to use the original ultrasonic welding head, frequency matching is very important, ultrasonic welding head offset will cause damage to the ultrasonic power supply and transducer.

7, be sure to use a voltage stable power supply, (if necessary, install a regulator before the ultrasonic power supply) Unstable power input will cause damage to the ultrasonic power supply, and the ultrasonic transducer will break.

Note: The ultrasonic handle is one of the main components of the ultrasonic spot welding machine. In order to extend the service life of the ultrasonic handle, read and understand the application instructions before use to prevent unnecessary losses caused by improper use.